9
10
USB CONNECTION
CHARGING YOUR SP-PRO
Red Light = Charging
Blue Light = Fully Charged
Connect the Micro USB Port on the side of the handle to any standard USB outlet or phone charger using
the included Micro USB cable. Batteries take approximately 2-3 hours to fully charge. Shorter charge times
can be achieved using higher mA rating AC/DC adapter.
Monitor Remaining
Battery Power:
4 Flashes = 100 - 76%
3 Flashes = 75 - 51%
2 Flashes = 50 - 26%
Flashes Quickly = 25 - 0%
Charging
Indicator
Light
Charging Port
Power
Indicator
Light
MOBILE CHARGING
FIRMWARE & SOFTWARE UPDATES
The USB Port on the bottom of the Tilt Motor can be used
to charge your smartphone while in use on the stabilizer.
Connect the Micro
USB Port on the side
of the Shift’s handle
to a portable power
source such as a USB
power pack (not
included) to extend
run-times and charge
while in use.
Firmware Update...
Connect the SP-PRO to your computer via Micro USB cable for
the firmware upgrade and calibration.
1. Visit EVOGimbals.com and click "Downloads” in the top
menu and find the SP-PRO Gimbal. Download and Calibration
Tool, the latest firmware version and USB Driver that works
with your computer.
2. Connect the computer and SP-PRO
together using the USB cable and
power on the SP-PRO
3. Using the Calibration Tool, follow
the instructions to upgrade the
firmware on the SP-PRO
USB Port
