5
6
GETTING STARTED
GETTING STARTED
3
MOUNT SMARTPHONE
4
BALANCE YOUR SMARTPHONE
5
VERTICAL (PORTRAIT MODE)
6
OPERATION
Smartphone Clamp
With the gimbal upright, begin balancing the Tilt
Axis by slightly loosening the Tilt Axis arm
thumbscrew.
Slide the arm in or our until the smartphone stays
balanced.
Loosen the Smartphone Clamp Thumb
Screw on the back, then rotate the
clamp with the smartphone mounted to
the desired direction (either in
horizontal or vertical).
Tighten the Thumb Screw to ensure
normal operations.
To Power on the
SP-PRO, Press & Hold
the power button for 3-4
seconds, the motors will
automatically power on
in the Pan Follow Mode.
To switch Modes, single
click the Mode Select
button to switch
between Pan Follow
Mode and Lock Mode.
Double click the mode
button to enter Pan and
Full Follow Mode.
To adjust the smartphone
Tilt angle, push up or
down on the joystick
while in Pan Follow
Mode or Lock Mode.
To adjust the smartphone
Pan angle, push left or
right on the joystick
while in Lock Mode.
To adjust the smartphone
Roll angle, push the
joystick left or right while
in Pan Follow mode or
Full Follow mode.
Mode Select
Joystick
Power ON/OFF
Record and
Take Photo
Warning
ALWAYS MOUNT YOUR SMARTPHONE
BEFORE YOU POWER IT ON!
FAILURE TO DO SO CAN DAMAGE THE UNIT!
1. Extend the smartphone clamp.
2. Slide the smartphone in the clamp. Push it
all the way until it touches the Tilt Motor pad
then release the smartphone clamp.
Tilt Motor pad
