EVO Gimbals Rage Gen.2, Руководство пользователя

Страница: 9 / 17

11 12
BALANCE ADJUSTMENT BALANCE ADJUSTMENT
Step One:
After camera is mounted to the mounting plate,
loosen the thumb screw lever underneath the
mounting plate to allow forward and backward
sliding of the plate.
NOTE: The thumb screw lever direction can be
adjusted by pulling the lever straight out and
rotating the lever to the desired direction.
Step Two:
Push the camera forward or backward to find its level balance.
Once the camera can stay still and almost level with its lens
facing front, tighten the thumb screw lever.
Loosen Thumb Screw . Adjust the balance by
sliding the Roll Axis Arm until the camera
stays horizontaly balanced. Complete this step
by tightening the Thumb Screw to secure the
Roll Axis arm.
Step Three:
Loosen Tilt Motor thumb screw . Adjust the
balance by sliding the Tilt Axis Arm until the
camera stays vertically balanced while pointing
up.
Balance Adjustment on The Tilt Axis
Balance Adjustment on The Roll Axis
2
2
2
2
1
1
1
1