Assembly Step 25 – Noise Making Unit
[27]
[Alpha Cloc k Five Assembly Guide]
Part
#24
is a magnetic speaker/buzzer.
The speaker has a marking on one
side (“+”) to indicate its polarity.
Insert the speaker, making sure that the “+” pin goes
into the matching “+” hole on the circuit board.
Solder both pins and clip the leads.
Remove the Kapton tape seal, if present.
It may also have a piece of yellowish (Kapton)
tape that seals the hole on the top.
Locate the speaker location, L1, next to the
power jack and identify the “+” side.