Everyway Comfy EMS, Инструкция по эксплуатации

Страница: 12 / 17

21 20
11. Patient Compliance Meter
This unit can store 60 sets of operation records. Total treatment
time up to 999 hours can be stored.
Check & Delete Individual Records
Press
“
Mode
”
control and turn on the power simultaneously.
The LCD will show the number of records and operation time.
Press the
“
Increment
”
and
“
Decrement button to check each
record. To delete a record, press
“
SET
”
control for 3 seconds.
Check & Delete Accumulative Record
At the individual records menu, press
“
Mode
”
control to switch
to accumulative record menu. Press the
“
SET
”
control first, then
press the
“
Mode
”
control simultaneously for 3 seconds and all of
the records will be deleted followed by a beeper sound.
12. Check/Replace the Battery:
Over time, in order to ensure the functional safety of the
Comfy EMS
®
,changing the battery is
necessary.
1. Make sure that both intensity controls are
switched to off- position.
2. Slide the battery compartment cover and
remove.
3. Remove the battery from the compartment.
4. Insert the battery into the compartment.
5. Note the polarity indicated on the battery
and in the compartment.
6. Replace the battery compartment cover
and slide to close
f . Set Pulse Width
The pulse width determines the length of time. Each electrical
signal is applied through the skin, which controls the strength
and sensation of the stimulation. Press
“
SET
”
control to enter
this setting. The pulse width is adjustable from 50 to 300 us.
g. Set Pulse Rate
The pulse rate determines how many electrical impulses are
applied through the skin each second. Press
“
SET
”
to enter
this menu. By pressing the increment and decrement controls,
the setting can be adjusted. The pulse rate is adjustable from
2 Hz to 150 Hz.
h. Set Timer
Press
“
SET
”
to enter this setting. The treatment time is adjust-
able from 1 to 60 minutes or Continuous. It is increased in 1
minute each step from 1 to 15 minutes, and 5 minutes each
step from 15 to 60 minutes. Press
“
Increment
”
or
“
Decrement
”
control to adjust setting. Your settings will be
stored in this unit eternally unless they are adjusted again.
You can set the timer to
“
Continuous
”
mode by pressing the
“
Increment
”
control when it shows 60 minutes.
Continuous