the selected filter has been reset. The filter’s icon will show with five full bars. To exit filter reset
function, short press the RESET button again after 5 seconds.
•
Flushing System:
Press the FLUSH button and you will hear a beeping sound once and flush will
begin. To stop flushing, press the FLUSH button again. If you press the FLUSH button while the system
is in a water-producing or full state, it will cause the RO membrane to be flushed for 120 seconds.
Troubleshooting
Cartridge Replacement
1. Turn off the cold water shut-off valve to the filter system.
2. Place a bucket or pan under the filter system to catch any water drips.
3. Turn each cartridge clockwise until it releases. Gently pull each cartridge down to remove from the
system head. Discard the used cartridges.
4. Repeat
Step 9
.
5. Turn on the cold water shut-off valve and the faucet for filtered water. Check for leaks. If there are
leaks, see
Step 10
.
6. To flush out any air and carbon fines (fine black powder), flush water through the faucet for filtered
water for approximately 30 minutes.
Содержание EVW-AZR-4RO
Страница 10: ......