evertz XRF1, Руководство пользователя, Страница: 53 / 60

XRF1/XRF1A 16x16 RF Router Manual
OPERATION
Revision 1.2
XRF1 - 6-5
4. To make the crosspoint selection, press [TAKE]. A “take successful” message should appear in the
display.
6.1.9. Control Configuration Items with the X-NCP2
Once a session is initiated, configuration changes may be made by pressing the [SETUP] button and using
the rotary encoder to select the desired configuration value, then pressing enter to select it. Configurable
values and the method of setting them is the same as doing so with the local control panel, as outlined
beginning in section 4.5.
6.1.10. Panel Lock Button
The panel lock function works the same as on the XRF-1 local control panel. Refer to section 5.1 for
details.
6.1.11. Lock Button
The destination lock function works the same as on the XRF-1 local control panel. Refer to section 5.5 for
details.
6.1.12. Protect Button
The destination protect function works the same as on the XRF-1 local control panel. Refer to section 5.6
for details.
6.1.13. Salvo Select Button
Pressing this button allows access to up to 8 pre-programmed salvos that have been configured using
Evertz
Vista LINK
®
software.
A SALVO is a pre-programmed sequence of crosspoint connections that can be constructed using
Vista LINK
®
and executed from the XRF1 Control Panel or X-NCP2. Execution of a salvo is very similar to
execution of an individual crosspoint connection, but the entire list of connections contained in the salvo is
performed.
To execute a salvo, press the [SALVO SELECT] button and use the scroll knob to browse the available
salvos. Press the [TAKE} button to execute the desired salvo.
6.1.14. Escape Key
The [ESC] key may be used to move up one menu level. At the top level of the configuration menu, it will
exit this mode and return to Destination select menu mode (default). Pressing the [ESC] key prior to the
[ENTER] or [TAKE] keys will exit the current configuration item without performing any crosspoint or
configuration changes.