evertz EQX-IP18-IPG, Руководство пользователя

Страница: 34 / 54

EQX–IP18-IPG
EQX Input and IP Gateway Module
Page - 24
Revision 1.0
7.4. INPUT ROUTE CONTROL
7.4.1. Route (Grid/ Management)
The Input Route Grid/ Management displays the current routes configured on the module. It shows
which SFP input is routed to which SDI output (out to crosspoint). These configurations are controlled
by MAGNUM.
Figure 7-13: Web Interface - Input Route Control Tab 1

Note: Input Route Control is managed by Magnum.

Note: Each SFP is 10G and it can carry up to 3 x 3G or 6 x HD signal .
To Perform Take
•
Most of the time the routes are managed by Magnum, in some exceptional cases manual
route can be done on the IPG as well. Once the manual route is done on the Grid, the Take
button has to be pressed for the change to be applied.
Route and State-Type
•
Both Route and State-Type are showing the pending routes which require the take button to
be pressed. Once the take button is pressed the table under the Rotue and State-Type will
be cleared.
Un-Route
•
Future use