evertz EQT Series Скачать руководство пользователя страница 47

Страница: 47 / 76

EQT Router User Manual

Revision 1.9.1

Page 33

View Live XPT Status

Displays the input that is currently mapped to each of the outputs
through the crosspoint.

View Video Signal
Information

Displays various information regarding both inputs and outputs, such
as locked status, video standard, and reclocker status.

4.2.8. Setting the Engineering/Debug

The

Engineering/Debug

menus are used to view and set parameters associated with the frame and

video configuration of the device. The following chart provides a brief description of the items available
in the

Engineering/Debug

menu.

View / Set Frame
Configuration

Configuration of the Q-Link address, inputs, outputs, level, and Q-Link
port.

View/Set Clean Switch
Configuration

Configuration of the clean/quiet outputs and relays. Clean switch (-CS
versions only) and relays (EQT-3224 and -CS versions only).

View / Set Video Signal
Configuration

Configuration of the video input standard, reclockers.

View/Set Test Modes

Enables or Disables Chop Switch Test mode.

Trace Information

Enables or Disables Crosspoint, Serial port and Socket port trace.

Reboot

Reboots the unit.



Note: The Engineering/Debug menu contains some controls that are intended for
debug purposes. Any item not mentioned in this manual should not be modified
under normal circumstances.

4.2.9. Viewing / Setting the Frame Configuration

The

View / Set Frame Configuration

menus are used to view and set parameters associated with the

frame. The following chart provides a brief description of the items available in the

View / Set Frame

Configuration

menu.

View Frame Information

Displays Q-Link address, inputs, outputs, level, and Q-Link port.

Set QLink Address

Sets the Q-Link address of the device.

Set Number of Inputs

Sets the number of Inputs of the device.

Set Number of Outputs

Sets the number of Outputs of the device.

Содержание EQT Series













































































Результаты поиска

Содержание EQT Series

Отзывы:

Похожие инструкции для EQT Series

Бренды по названию

Популярные бренды

evertz EQT Series, Системное руководство

Результаты поиска

Содержание EQT Series

Отзывы:

Похожие инструкции для EQT Series

Бренды по названию

Популярные бренды