evertz EMX Series, Руководство пользователя

Страница: 16 / 28

EMX Series Multiframes
Page - 8
Revision 1.6
2.5.2.1. EMX1-FR
EMX1-FR power supplies have 2 LEDs which are located on the rear side of the frame, showing the
status of each supply. Top LED is green and indicated AC power is on or off. Bottom LED is bi-colored:
green and yellow. This indicated DC power presence or fault situations. For the position of LEDs see
Figure 2-4. The following table shows different LED states:
Operating Condition LED Signaling
AC LED
AC Line within range Solid Green
AC Line UV condition Off
DC LED
12V DC
Solid Yellow
Over temperature shutdown
Output over voltage shutdown (12V DC)
Output over current shutdown (12V DC)
PSU Fan Error (>15%)
Over temperature warning Blinking Yellow/Green (2:1)
Minor fan regulation error (>5%, <15%) Blinking Yellow/Green (1:1)
12V DC Good Solid Green
Table 2-1: LED Status
2.5.2.2. EMX3-FR and EMX6-FR
Each power supply has two status indicator LEDs. The green PSU STATUS LED indicates the health of
the local power supply and its fans. The green PSU STATUS LED will be On under normal conditions.
The FRAME STATUS LED indicates the health of the entire frame and is operated by the frame status
bus of the frame. The red FRAME STATUS LED will be Off under normal conditions and On when there
are Frame Status Fault conditions.
If one of the power supplies malfunctions, (power cord disconnected, power switch is off, fuse is blown,
rear fan is stopped, etc,) then its green PSU STATUS LED will go Off, and the red FRAME STATUS LED
on both power supplies will turn On and the Frame Status fault will be signaled to the Frame status buss.
The PSU STATUS LED on the power supply that is functioning will remain On.