background image

 

 

 

 

 

 

 

 

       

7700 MultiFrame Manual 

7707MTA-HD Multi-Signal HD/SD, AES, and Control Fiber Transmitter 

 Revision 

1.3 

 

 

TABLE OF CONTENTS

  

 

1. OVERVIEW.......................................................................................................................................... 1

 

2. INSTALLATION................................................................................................................................... 3

 

2.1.1.  Electrical Signal Connections.......................................................................................... 4

 

2.1.2.  Optical Signal Connections ............................................................................................. 5

 

2.1.2.1.  Single Fiber Versions ....................................................................................... 5

 

2.1.2.2.  Dual Fiber Versions .......................................................................................... 6

 

2.2.  CARE AND HANDLING OF OPTICAL FIBER........................................................................... 7

 

2.2.1. Safety .............................................................................................................................. 7

 

2.2.2. Assembly......................................................................................................................... 7

 

2.2.3. Labeling........................................................................................................................... 7

 

2.2.4.  Handling and Connecting Fibers ..................................................................................... 7

 

3. SPECIFICATIONS............................................................................................................................... 8

 

3.1.  SERIAL DIGITAL VIDEO INPUT................................................................................................ 8

 

3.2.  SERIAL DIGITAL VIDEO OUTPUT............................................................................................ 8

 

3.3. AES 

AUDIO INPUTS .................................................................................................................. 8

 

3.4. SERIAL 

DATA ............................................................................................................................ 9

 

3.5.  GENERAL PURPOSE INPUTS.................................................................................................. 9

 

3.6.  GENERAL PURPOSE OUTPUTS .............................................................................................. 9

 

3.7. OPTICAL 

INPUTS/OUTPUTS .................................................................................................... 9

 

3.8. ELECTRICAL ........................................................................................................................... 10

 

3.9. PHYSICAL ................................................................................................................................ 10

 

4. STATUS 

INDICATORS AND DISPLAYS ......................................................................................... 11

 

4.1.  STATUS INDICATOR LEDS .................................................................................................... 11

 

4.2.  DOT MATRIX DISPLAY ........................................................................................................... 13

 

4.2.1.  Displaying Warning Status Indications .......................................................................... 15

 

4.2.2.  Displaying the Standard of Input Video ......................................................................... 16

 

4.2.3.  Displaying the Embedded Audio Status of Input Video................................................. 16

 

4.2.4.  Displaying the AES Audio Sample Rate........................................................................ 16

 

4.2.5.  Displaying the GPI Status ............................................................................................. 17

 

4.2.6.  Displaying the GPO Status............................................................................................ 17

 

4.2.7.  Displaying the Received Optical Power ........................................................................ 17

 

4.2.8.  Displaying the Firmware Version................................................................................... 18

 

Содержание 7707MTA-HD

































Отзывы: