7700 MultiFrame Manual
7707MTA-HD Multi-Signal HD/SD, AES, and Control Fiber Transmitter
Revision
1.3
Page-15
Destinations
MIX (Audio Mixer)
Selections
MIX2 (Mixer 2)
MIX1 (Mixer 1)
Selections
R (Right)
L (Left)
Selections
AES1 (AES Input 1)
G11 (Goup 1, Channel 1)
Sources
MIX3 (Mixer 3)
MIX4 (Mixer 4)
Selections
ADD2 (Mixer Input 2)
ADD1 (Mixer Input 1)
Selections
R (Right)
L (Left)
AES2 (AES Input 2)
AES3 (AES Input 3)
AES4 (AES Input 4)
G12 (Goup 1, Channel 2)
G21 (Goup 2, Channel 1)
G22 (Goup 2, Channel 2)
G31 (Goup 3, Channel 1)
G32 (Goup 3, Channel 2)
G41 (Goup 4, Channel 1)
G42 (Goup 4, Channel 2)
NONE (Mute Mixer Input)
JACK (Monitor Jack)
Selections
FRST(Factory Reset)
BACK (Abort)
DISP (Display Orientation)
VERT (Vertical)
HORZ (Horizontal)
Selections
YES (Accept)
NO (Abort)
VOL (Volume)
0 to 50 (Arbitrary Range)
CHAN (Audio Channel)
Selections
Selections
EDET (Error Detection)
FIN (Fiber-Link Input)
ON (Indicate Errors to LED)
OFF (Disable Error Indication)
Selections
Selections
VIN (Video Input)
ON (Indicate Errors to LED)
OFF (Disable Error Indication)
Selections
Selections
AIN (AES Inputs)
ON (Indicate Errors to LED)
OFF (Disable Error Indication)
Selections
Selections
Selections
AES1 (AES Input 1)
G11 (Goup 1, Channel 1)
AES2 (AES Input 2)
AES3 (AES Input 3)
AES4 (AES Input 4)
G12 (Goup 1, Channel 2)
G21 (Goup 2, Channel 1)
G22 (Goup 2, Channel 2)
G31 (Goup 3, Channel 1)
G32 (Goup 3, Channel 2)
G41 (Goup 4, Channel 1)
G42 (Goup 4, Channel 2)
MIX1 (Mixer 1)
NONE (Mute Jack)
MIX2 (Mixer 2)
MIX3 (Mixer 3)
MIX4 (Mixer 4)
?
Toggle
Switch
?
CTRL (Control)
Pushbutton
?
Menu Level 1
Menu Level 2
Menu Level 3
Menu Level 4
Menu Level 5
Menu Level 6
Menu Level 7
Figure 4-3: Card Edge Menu Structure Continued
4.2.1. Displaying Warning Status Indications
Upon entering menu level 1 on power up, or following a configuration selection, the default display
selection will indicate the warning status of the 7707MTA-HD. This warning status indication can also be
entered while already in menu level 1, by using the toggle switch. During normal operation, while no
warning conditions are active, the
OK
indication will be displayed. Four warning indications can supersede
this display state. The following list describes possible indications for this menu item, listed in order of
display priority:
LASR…ERR
Laser Error Warning. Flashing indication alternates between
LASR
and
ERR
LINK…LOS
Loss of Optical link input. Flashing indication alternates between
LINK
and
LOS
VID…LOS
Loss of Video input. Flashing indication alternates between
VID
and
LOS
OK
Okay. No warning conditions are active
Note that while the optical input to the companion 7707MRA-HD is invalid (e.g. not connected) then the
optical output of the companion 7707MRA-HD will also be invalid. This will result in a LINK…LOS
condition at the optical input of the 7707MTA-HD.