7700 MultiFrame Manual
7707MTA-HD Multi-Signal HD/SD, AES, and Control Fiber Transmitter
Revision
1.3
Page-1
1. OVERVIEW
The 7707MTA-HD is a fiber transmitter that extends one HD or SD digital video signal over a fiber optic
link, accompanied by four AES audio signals, serial data, two GPIs and two GPOs. Audio and control
signals are embedded into HD, SD, or SDTi video for optical transport. Embedded audio and control are
extracted from the optical signal by a companion receiver module. DVB-ASI signals may also be
transparently passed, but audio, serial data and GPIO functions are disabled. The 7707MTA-HD is
designed to operate with a companion 7707MRA-HD receiver.
Monitoring and control of card status and parameters is provided locally at the card-edge. The 7707MTA-
HD occupies one card slot and can be housed in either a 1RU frame, which will hold up to three modules,
or a 3RU frame, which will hold up to 15 modules.
Features
•
HD/SD video, AES audio, serial data, and GPIO conveniently presented in a single product
•
Provides embedding of audio and control signals into HD-SDI (SMPTE 292M), SD-SDI (SMPTE
259M-C), or SDTi (SMPTE 305.2M)
•
Transparently passes DVB-ASI
•
Flexible routing and mixing of input and embedded audio to/from all 4 groups, with L/R resolution
•
Adjustable input AES delay up to 42ms
•
Feed-forward AES error status for selectable pop-reduction on companion 7707MRA-HD
•
Audio sample rate conversion permits asynchronous input of 32KHz, 44.1KHz, or 48KHz AES, with
up to 24-bit resolution
•
Audio sample rate conversion may be disabled to permit Dolby
TM
-E support
•
Audio inputs automatically accept balanced or unbalanced AES without configuration
•
Bi-directional serial port accommodates RS-422, RS-232, or RS-485 data up to 153Kbaud
•
Monitoring of input video format, audio group availability, EDH or CRC errors, optical power, etc
•
Comprehensive signal and status monitoring via four-digit card-edge display
•
SC/PC, ST/PC, or FC/PC fiber connector options
•
Fully hot-swappable from front of frame