evertz 5782DEC, Руководство пользователя

Страница: 19 / 60

5782DEC
Professional H.264 and MPEG-2 Decoder
VLPRO INTERFACE
Revision 1.0
Page - 9
4. VISTALINK
®
PRO INTERFACE
This chapter assumes that the VistaLINK
®
PRO server and client are already configured for your
network and you have basic knowledge of the VistaLINK
®
PRO interface. It also assumes that the user
or network administrator had already added the appropriate JAR file to the server, and both the client
and server applications have been restarted.
There are two methods that can be used to communicate with the 5782DEC and VistaLINK
®
PRO.
1. 570FC Frame Controller and 5782DEC with appropriate JAR file. Ethernet connection is made
to the 570FC control port from VistaLINK
®
PRO.
Open VistaLINK
®
PRO and click on the refresh tree icon. Expand the hardware tree by clicking
on the “+” button on the IP address of the frame controller’s port. The 570FC should show up
and the number of 5782DEC cards installed after it in the tree formation.
2. Using the 570FC control port and WebEASY UI for direct web access control (discussed
further in Section 5).
Open VistaLINK
®
PRO and click on the refresh tree icon. Select 5782DEC and right click to View
Configuration… .
4.1. SYSTEM TAB
Figure 4-1: VistaLINK
®
– System Tab
Decoder Control
Decoder Reset: This control allows the user to reset the decoder.