evertz 570REM-RX8-10GE, Руководство пользователя

Страница: 31 / 42

570REM-RX8-10GE
User manual
Revision 1.0
Page 21
4.7.1. Rx Input Monitor
Input State: This parameter indicates whether the card is receiving anything on the input or not.
Num Programs: This parameter indicates the number of programs detected in the input stream.
Transport Stream ID: This parameter indicates the transport stream ID that is being read from the PAT
table.
Network Name: This parameter indicates the network name read from the transport stream.
PSD Service Type: This parameter indicates the service type read from Evertz private service
descriptor (79) from the PMT. It provides an enumerated string as follows: 1- Digital TV, 2- Digital
Radio, 3- Teletext, 4- NOVD Reference, 5- NOVD Timeshifted, 6-Mosaic, 7- PAL Signal, 8-SECAM
Signal, 9- DMAC, 10- FM Radio, 11-NTSC, 12- Data Broadcast, N/A- means that a valid service type
was not found or there is no private descriptor.
PSD Provider Name: This parameter indicates the provider name read from the Evertz private service
descriptor (79) from the PMT.
PSD program Name: This parameter indicates the program name read from the Evertz private service
descriptor (79) from the PMT.
PSD Network ID: This parameter indicates the network ID read from the Evertz private service
descriptor (79) from the PMT.
4.7.2. Decoder Input program Control
Program Tuning Mode: This dropdown allows the user to select the program Tuning mode of the
decoder. “Auto PID Increment” automatically chooses the PIDs for each audio stream in the order in
PMT table based on auto program select mode. “Manual PID Select” manually selects PIDs for each
audio stream. “Auto Channel ID” uses channel identification in PES header to know the order.
Auto Program Sel Mode: This control allows the user to set how the decoder will select a program for
decoding when Program Tuning Mode is set to auto.
•
In First Program In PAT mode, audio PIDs will be chosen from the first program.
•
In Lowest Program Num, audio PIDs will be selected from lowest program.
•
In Specific Program Select mode, audio PIDs will be selected from specific program, specified
by Program Number Select control, for decoding.
Program Number Select:
This control allows selecting the program which the decoder will decode.
This control is only applicable when the Program Tuning Mode is set to Auto PID Select
4.7.3. Manual PID Control
NOTE:
0, 1 and 8191 are reserved PID in MPEG so these are not included.
Video PID Select: This control allows user to configure the Video PID which decoder will decode. This
control is only applicable when the programTuningMode is set to manualPidSelect .
PCR PID Select: This control allows the user to configure the required PCR PID. This control is only
applicable when the programTuningMode is set to manualPidSelect .
VANC PID Select: This control allows the user to select the VANC PID which decoder will decode. This
control is only applicable when the programTuningMode is set to manualPidSelect .