CCTV testerPRO User’s Manual
b.
Press SET key and then press
or
key to select communication port according to
the system connection. Press SET key to save the change.
d.
Press
or key to select the baud rate according to the baud rate of controlling
system and then press SET key to save the change and capture command data from
controlling system.
e.
Press RETURN key to clear the screen.
3.8 Device setting
Set the parameters of the CCTV testerPRO
Auto poweroff: Setting the time of auto shut-down.(Disable,5,10,…,60)
Disable: Disable the “Auto poweroff” function. 5 means the CCTV will power off
after 5 minutes when there is no any operation.
Keypad tone: Open or close the beep of pressing keypad.
Language: Select language of OSD menu
Brightness: Setting the brightness of OSD menu and background.(0~7)
Address search: off / on Open or close the PTZ address search Menu.
a. Press
or
key to move the parameter we want to change.
b. Press
or
to change the value.
c. Press ENTER to save the change or press RETURN key to give up the change.
Ver: STPV1.32
Page.17
.
