CCTV testerPRO User’s Manual
a.
Press the
or
key to select the parameter which we want to change the value.
b.
Press the
or
key to change the value.
c.
Press ENTER key to save the change or press RETURN key to give up the change
3. 6 Cable Tester
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV testerPRO and cable tester. And then the
connecting status, cable type and the sequence of wires will be displayed, as well as the serial
number of the cable tester kit
The right picture shows line1-7 are closed, line8 is open and the number of the cable tester box is
255
Straight-through Line Cross Line Open Line or Short Line
3.7. Data monitor
Capture the command data from RS485 controlling system.
a.
Connect the RS485 or RS232 interface of controlling system
with the RS485 or RS232 interface of the CCTV testerPRO
(In case of RS485, A to A, B to B)
Ver: STPV1.32
Page.16
.
