Installation & Wiring instructions
1. Use the mounting bracket to mark the position of the
mounting holes
2. Dnll the holes and insert suitable wall plugs
3. Fix the mounting bracket to the wall using suitable
screws.
Wiring instructions
WARNING: Isolate the mains power supply to prevent electrical shock.
4.
It is recommended to add an intemal single pole wall switch to allow
easy control of the
AC POVER
N
N
5.
Connect the mains power supply to the pre-wired cable provided with the fitting as
shown above. If the connection is made outdoors a suitable waterproof IP box must be
used to make the connections.
Follow exactly the wire colors as below:
- BROWN (Live) wire to the mains live connection via a wall switch
- BLUE (Neutral) wire to the mains neutral connection.
- GREEN/YELLOW wire to a suitable earth point. The unit must be earthed.
Note: Do not remove the pre-wired supply cable. This will invalidate the warranty.
4
