10
then release.
is flashing, which implies that
the unit enters learning mode. Learning timeout
period is 30 seconds.
3. Press a button (
,
,
,
,
,
~
,
,
or
) on the unit,
is on steadily, hold the
button while pressing a corresponding button of TV
remote controller. Release both buttons,
is
flashing, which implies that the unit is ready for
learning next button and resumes 30 seconds
countdown.
4. If learning fails,
will be shown.
Note:
If button pressing is too long during learning
process, IR signal will be repeated when using the
unit to control TV (e.g. press button 2 on the unit,
the TV received 22).
5. To learn next button, repeat step 1-4.
6. Upon completion, press
to save and exit
learning mode.
Note:
The unit cannot replace all the functions of
TV remote controller.
5-2 TV Mode Operating Instructions
1. Press the button next to
once to switch the unit
from RF mode to TV mode,
is on.
2. Press a learned button (
,
,
,
,
,
~
,
,
or
) on the unit to control TV.
6-1 DVD Mode
To learn the functions of DVD Remote Controller (IR):
1. Press the button next to
twice to switch the unit
from RF mode to DVD mode.
is on.
2. Press
for 3 seconds until
is on steadily
then release.
is flashing, which implies that
the unit enters learning mode. Learning timeout
period is 30 seconds.
3. Press a button (
,
,
,
,
,
~
,
,
or
) on the unit,
is on steadily, hold the
button while pressing a corresponding button of
AC124
TV Remote
Controller
Within 5cm in
line of sight