EverSewn sew&go 1, Руководство по ремонту

Страница: 14 / 31

13
5-9 Height of needle bar
1) Remove the face plate and free arm
cover.
2) Remove shuttle hook.
3) Place the gauge of diameter 23mm into
the center of the hook. (1).
4) Set needle at its lowest point,stop at
the position whan point of the needle
across the edge of the gauge. (1)
5) Loosen screw (a). (2)
6) Adjust height of needle by moving
needle bar (B) upward / downward.(2)
7) The correct setting of gauge should be
23mm.
8) After adjusting, re-tighten screw (a).
a
B
2
a
B
2
1