According to the tape width
used, install the first roll side
plate in the correct position.
See Figure 1, first insert the
upper part of the side plate
into the front slot.
See Figure 2, now insert the
lower end of the side plate
into the front slot.
See Figure 3, finally, insert
the bottom of the side plate
into the bottom slot.
Repeat with the opposite roll
side plate. The tape roll
should be central with some
space either side, not too
tight against the plates.
3
. ROLL SIDE PLATE INSTALLATION
1
2
3
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen T49 208 99475-0 T49 208 99475-31 [email protected] eversgmbh.de
