GT-800/GT-800BT User’s Manual
EverMore Technology, Inc.
2F, No.7, R&D Road 1, Science-Based Industrial Park, Hsinchu, Taiwan, 300, R.O.C.
http://www.emt.com.tw
8
●
Learning Key functions
BLUETOOTH LED
(BLUE)
Light On/Off (Continued on): Pair Searching
Light On/Off (1 sec/1 sec): Linking completed
1. POWER CHARGE JACK
2. USB DOWNLOAD
1. GPS LED
(GREEN)
2. MEMORY STORAGE LED
Light On/Off (Continued on): Acquiring Satellites
Light On/Off (1 sec/2 sec) : Position Fixed
Memory storage full LED
(RED)
Memory storage full LED + GPS unfixed
(ORANGE)
Memory storage full LED + GPS fixed
(ORANGE
LED flashing) ( 1 sec on/ 2 sec off)
1. POWER BUTTON
GPS & Bluetooth LED off: Three presses
on power button and hold it for 3 sec
Bluetooth LED: Two presses on
power button and hold if for 3 sec
GPS LED: One press on the power
button and hold it for 3 sec
1.1
1.2
1.3
2. BATTERY STATUS LED
(RED)
Light Off: Battery full or not in charging
Light On/Off (1 sec on /2 sec off): Battery low.
Turn off after 5 minutes - Press the power button - GPS light
will on and red light flashes under 10 sec - then turn off
Light On: In charging
Important Notice
1. After you turned on the power, please make sure the GPS position is fixed then start recording. (The
GPS Green LED flashes 1 sec on / 2 sec off while tracking)
1.1 If the GPS unit can not get a fix, please bring the unit to the open sky environment and hold it for
about a minute until the GPS position is fixed.
2. The digital camera clock setting must be set according to the system time displayed on the computer
before taking the photo. This data is used to match the photos to their GPS positions. If the time is
wrong in your camera, the photos will be tagged in the wrong places.
3. To download the data, please make sure you turn on the power of GPS unit first, then make connection
with PC via USB cable.
