Everlast Smart XV10, Сборка и инструкция пользователя

Страница: 17 / 30

17
Trouble Shooting
Treadmill Maintenance
MESSAGE AND SOLUTION:
Problem Reason How to rectify the problem
Treadmill does not
work
a. Power Supply disconnected Connect the power supply
b. Safety key not located correctly Place the safety key in the correct location
c. Transformer loose or transformer defective Secure the transformer or change the
transformer
d. Electro circuit interrupt
Check the connect wire and the terminal of the
connect wire
Treadmill stop
suddenly
a. Safety key loose Replace the safety key
b. Electronic System Problem Consult the after sale service
Key defective
Key is damaged Change key
Key does not work
Change key board and wire.
Change pcb board.
Change computer.
E1
a. Console wire loose or defective Reconnect the wire or Change the wire
b. Computer defective Change the computer
c. Transformer defective Change the transformer
d. Controller defective Change the controller.
E2
a. Motor connect wire or motor defective. Change the motor wire or change the motor
b. The connect wire between the motor and
controller is loose or controller defective
Reconnect the wire or change the controller
E3
a. Speed sensor out of position Adjust the speed sensor position
b. Speed sensor defective Change the speed sensor
c. Speed sensor disconnected from MCB Reconnect the wire
d. Controller defective Change the controller
E5
Controller defective Change the controller
Motor defective Change the motor
E7 Computer can not test the safety key signal Check the safety key and locate correctly
No pulse
Handle pulse wire not connected or damaged Reconnect the wire or change the wire
Console circuitry defective
Change the console
Console short of
display
The screw on the pcb is loose Tighten the screw
Console defective Change the console