Everlast PowerPlasma 100S, Руководство оператора

Страница: 20 / 32

20
Basic theory and function
Section 3
FLAME AT NORMAL TRAVEL SPEED
TRAVEL
FLAME AT FAST TRAVEL SPEED
TRAVEL
FLAME AT SLOW TRAVEL SPEED
TRAVEL
NOTE: When stepping down amps to cut thinner material, you must change to small-
er orifice nozzle. Nozzles are offered in different sizes which are appropriate for differ-
ent amp levels. Too large of a diameter orifice will result in arc instability and a rough
cut. Lowering the air pressure below 65 psi to try to get the torch to cut will only re-
sult in a lazy, wandering arc.
TIP: For longer consumable life do not use the pilot arc unnecessarily. Select the 3 second
pilot arc feature and do not fire the torch unless you are near the metal and ready to cut.
For expanded metal cutting be sure to select
“ Normal ” to re - fire the pilot arc automatically.
IMPORTANT: Check consumables regularly for wear and change them out before
they are completely worn. Allowing the consumables to wear until they quit working
may damage related torch components, creating a more costly repair.