8
TRAMPOLINE PLACEMENT
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA
everlast_sa
1. Make sure the trampoline is placed on level ground. Uneven
ground surface may cause the trampoline frame to warp.
2. Make sure that all bolts holding the frame joints are tighten completely before
installing the springs. Failure to do this properly will cause the frame to warp.
3. Make sure NOT to use ones leg to push against the trampoline leg or frame
when loading the springs. It will cause the trampoline to warp.
4. DO NOT load the springs onto the frame on only one side of the trampoline.
Uneven distribution of tension from the springs will cause the frame to warp.
5. If the trampoline frame warps up, do not be alarmed as the “Quad-Lock” system is
designed to be flexible. Push down on the part of the frame that warped with
two people as shown. The frame will level out.
FOR SAFE USE OF THE TRAMPOLINE, PLEASE BE AWARE OF THE FOLLOWING WHEN SELECTING A
PLACE FOR YOUR TRAMPOLINE
•
Make sure it is placed on a level surface.
•
The area is well lit.
•
There are no obstructions beneath the trampoline.
•
The minimum overhead clearance required is 7 meters. Please ensure that there are no overhead hazards such as
tree limbs or electrical power wiring.
•
In order to prevent the trampoline mat from getting cut or damaged please do not allow any pets onto the mat.
•
Make sure there is lateral clearance around the trampoline from hazardous objects such as walls or fences.
PLEASE READ THESE ASSEMBLY GUIDELINES BEFORE STARTING TO ASSEMBLE THE TRAMPOLINE.
INCORRECT ASSEMBLY WILL CAUSE DAMAGE TO THE TRAMPOLINE FRAME.
