17
ASSEMBLY INSTRUCTIONS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA
everlast_sa
STEP 7
1. Layout the Trampoline Mat (1) with the warning labels facing upwards. Make sure to wear heavy duty working gloves
to protect your hands as well as goggles to avoid injuries to the eyes. Use the special Spring Loading Tool (17)
included. Hold the spring loading tool under hand and pull the spring hook towards the steel frame as shown; drop
the hook into the frame hole until it latches on completely, tap it down if the hook is not completely in the hole.
2. There are a total of 64 springs, for even distribution of spring tension and ease of assembly,the spring must always be
installed on opposite sides of the mat in an alternating manner, as shown in below diagram.
Tip: The number of triangle-rings sewn onto the mat is equal to the number of holes on the frame. lf you notice that
you have miscounted a hole or triangle-ring, remove and reinstall the springs as necessary while maintaining an even
distribution of tension as explained above.
2
1
3
5
6
8
4
7
15
4
1
17
1
