background image

Customer Service 1-888-707-1880  

                                                                                          

Dyaco Canada Inc. 2013  

Email: [email protected] 

5

 

!!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS.  
PLEASE READ BEFORE UNPACKING YOUR FOLDING TREADMILL!! 

 

 

Serious injury could occur if this folding treadmill is not unpacked properly. 
There is a Velcro strap installed around the treadmill base that prevents the treadmill from 
unfolding accidentally during shipping. If this strap is not removed properly the treadmill 
could spring open unexpectedly and cause injury if someone is standing near the treadmill 
when the strap is removed. 
 
To ensure your personal safety during removal of the shipping strap please make sure the 
treadmill is positioned flat on the ground, in the orientation it would be in if you were using 
the treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This 
could cause the treadmill’s folding mechanism to spring open. If the end of the Velcro strap 
(that you need to grab to remove it) happens to be under the treadmill deck, reach under 
the deck to grab it, but do not tilt the treadmill up to gain access to the strap end. 
 
Unpack the treadmill and locate the hardware pack. The hardware pack is separated into 
five sections; one section containing tools and four sections labeled steps 1-4 which 
contain the hardware needed for assembly of each step. The assembly steps below are 
numbered one through four and correspond to the hardware in the numbered sections of 
the hardware pack. Remove only the hardware for the step you are currently assembling to 
avoid confusion and mix ups. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Assembly Instructions 

Содержание 1653501
























Отзывы: