background image

Customer Service 1-888-707-1880  

                                                                                          

Dyaco Canada Inc. 2013  

Email: [email protected] 

2

IMPORTANT SAFETY INFORMATION 

THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY 

READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL 

 

CAUTION:  

Before starting any exercise program, it is recommended that you consult your 

physician. 

WARNING:  

Connect this unit to a properly grounded outlet only. 

DANGER:  

To reduce the risk of electric shock, always unplug the treadmill from the electrical 

outlet immediately after using and before cleaning. 

WARNING 

To reduce the risk of burns, fire, electric shock, or injury to persons

:

 

1.  Use 120 volt a.c. household current on a dedicated circuit. 

 Grounding 

Instructions

 

 

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least 
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having 
an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate 
outlet that is properly installed and grounded in accordance with all local codes and ordinances.  See diagram 
below for grounding methods.

 

 

2.  It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed 

of all warnings and precautions. 

3.  The use of an extension cord with this product is not recommended. If an extension cord is needed, 

use a short (less than 10 feet) heavy gauge (14 gauge or better) extension cord with a three prong 
(grounded) plug and receptacle. 

4.  Never leave the treadmill unattended when plugged in. Remove the safety key and unplug the unit 

from the outlet when not in use and before removing or replacing parts. 

5.  Never operate the treadmill if it has a damaged cord or plug, if it is not working properly, if it has 

been dropped, damaged, or exposed to water. Never move the treadmill belt while the power is 
turned off. 

6.  Do not pull the treadmill by the power supply cord or use cord as a handle. Keep cord away from 

heated surfaces and open flames. 

7.  Fitness equipment must always be installed and used on a flat surface. Do not use outdoors or 

near water. Do not place the unit on a loose rug or uneven surface. It is recommended to use an 
equipment mat to prevent the unit from moving while it is being used, which could possibly scratch 
or damage the surface of your floor. It is recommended to have a minimum of 3 metres safe 
clearance on all sides of the treadmill while in use. 

8.  Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage, 

covered patio or near water. 

9.  Do not operate the treadmill where aerosol products are used or where oxygen is being 

administered. 

10.  Read, understand, and test the emergency stop procedure before using the treadmill. Do not insert 

any objects into any openings. 

11.  Inspect and properly tighten all parts of the treadmill regularly. 
12.  Keep children and pets away from this equipment at all times while exercising. 
13.  Handicapped individuals should have medical approval and close supervision when using this 

treadmill. 

14.  Do not place hands or feet under the treadmill. Always keep hands and legs off of the treadmill 

when others are using it. 

Содержание 1653501
























Отзывы: