Customer Service 1-888-707-1880
or email [email protected]
15
Dyaco Canada Inc.©2021
Workout setting
1. Press MODE key to select the function of TIME, DISTANCE, CALORIES and PULSE. Use
UP Key for setting and press MODE key for confirmation.
2. For instance the time set-up, when the time value is blinking, you can use UP Key to adjust
the number. Press MODE key for confirmation and skip to next set-up. The set-up of
DISTANCE, CALORIES and PULSE is the same as TIME set-up.
3. Once the workout begins and the console picks up the exercise signal, the value of
SPEED/RPM, TIME, DST and
CAL will count up on the display.
Recovery
1. The RECOVERY key will only be valid if pulse is detected.
2. TIME will show "0:60" (seconds) and counts down to 0.
Computer will show F1 to F6 after the countdown to test heart rate recovery status. User
can find the heart rate recovery level based on the chart below.
3. Press RECOVERY key again to return to the beginning.
F1
Outstanding
F2
Excellent
F3
Good
F4
Fair
F5
Below average
F6
Poor
Trouble shooting:
When the display of LCD is dim, it means the batteries need to be changed.
If there is no signal when you pedal, please check if the cable is well connected.
NOTE:
1.
When stop training for 4 minutes, the main screen will be off.
2.
If the computer displays abnormally, please re-install the batteries and try again.
APP CONNECTIONS
Supports iConsole, Kinomap and Zwift, downloaded on Google Play or APP Store
1. This console can connect to certain APPs on smart devices via Bluetooth.
2. Once the console is connected via Bluetooth, the console will not display feedback, the
console will restart after Bluetooth is disconnected from an affiliated APP.
1. iConsole APP Connection Steps
1-1. Open the iConsole App and navigate to the home page. From the Get Started tab, press
Quick Start or any other Training Mode.
1-2. Select i-Console to connect console. Press the top right arrow key to enter the workout screen.
1-3. Begin workout. To pause or stop workout, press the screen to display options.
