www.everik.com
TLB2.EZ2000.LU.102011.IM
Model:
IM-TLB2
EZ-2000
Tools Required
•
Phillips head screwdriver
•
M8 socket and wrench
•
Electric drill and 10mm masonry bit for concrete wall installation
•
Pencil
•
Hammer
•
Stud finder
A
B
C
D
E
Wall plate
Adaptor brackets
Lag bolt
Concrete anchor
M4/M5 washer
x1
x2
x6
x6
x8
F
G
H
I
J
M6/M8 washer
M8 washer
M4 lock washer
M5 lock washer
M6 lock washer
x8
x6
x4
x4
x4
K
L
M
N
O
M8 lock washer
M8 spacer
M4x15
M4x30
M5x15
x4
x4
x4
x4
x4
P
Q
R
S
T
M5x30
M6x15
M6x30
M8x25
M8x40
x4
x4
x4
x4
x4
PARTS LIST
Instructions
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! IF YOU
DO NOT UNDERSTAND THE INSTRUCTIONS, OR DO NOT FEEL THAT YOU CAN FOLLOW THEM
SAFELY, CONTACT A QUALIFIED CONTRACTOR. THE WARRANTY WILL BE HONOURED IF
ACCOMPANIED BY AN ORIGINAL SALES RECEIPT, AND ONLY IF THE INSTRUCTIONS HAVE BEEN
FOLLOWED EXACTLY.
To acquire missing parts please visit www.everik.com/parts.html or call
1-866-604-6966.
•
The IM-TLB2 is designed to mount a panel onto a vertical wall. Hardware for mounting to a wood stud is included. For
mounting to any other surface, it is recommended you contact a qualified contractor.
•
The wall or mounting surface must be capable of supporting the combined weight of the mount and the flat panel,
otherwise the structure must be reinforced.
•
Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use
safety gear and/or attempting this installation alone can result in property damage, serious injury, or death.
•
Follow all instructions and recommendations regarding adequate ventilation and suitable locations for mounting your
flat panel. Consult the owner‘s manual of your flat panel for more information.
•
This product will hold flat panels up to 60” and weighing up to 165 lbs.
•
VESA 600mm x 400mm
