Everglades EVBI630, Инструкция по эксплуатации

Страница: 10 / 63

10
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct
sunlight etc. Maximum performance and safety are guaranteed by maintaining the
correct indoor temperature for the class of unit concerned, as specified on the rating
plate. This application perform well in N. The Appliance may not work properly if it is left
for a longer period at a temperature above or below the indicated range.
Climate classification Ambient temperature
SN 10~32 ć
N 16~32 ć
ST 16~38 ć
T 16~43 ć
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the
lower rear section of appliances, as poor air circulation can affect performance. Built-in
appliances should be positioned away from heat sources such as heaters and direct
sunlight.
Reversing the door
The side at which the door opens can be changed from
the right side (as supplied) to the left side, if the
installation site requires. Tilt the appliance slightly towards
the rear and prop it securely. Unscrew the door hinge
screws and remove the hinge pin bracket. Open the door
a little way and take it out downwards.
Unscrew the upper pin and screw it into place on the opposite side. Fit the door into the
upper pin and close it. Screw the hinge pin bracket securely into place on the opposite
side using the screws.