VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
97
Direction Buttons:
Click the direction buttons to force the PTZ camera to turn to the direction.
Auto Pan:
Click to start the Auto Pan function. Click again to stop the Auto Pan function.
Speed:
Slide the bar to the left or right to adjust the control speed.
Zoom:
Click + or – to zoom in or zoom out.
Focus:
Click + or – to focus near or focus far.
Iris:
Click + or – to adjust the Iris.
Preset Control:
You can set up preset points here and then operate the Preset function.
Please see the below steps for more details.
Tour Control:
To perform this function, the
Tour
function must be enabled (Settings >
Storage/PTZ > PTZ > Tour). After setting up the preset points, you can perform the Tour
function. Click
to start the Tour function, click
to stop the Tour function.
To set up Preset Points:
1.
Select a preset number (1-255) by clicking on the Preset input box.
2.
Use the direction buttons or Zoom/Focus/Iris buttons to search for the location for this
preset number.
3.
Click the
+
button to add this preset point, and the number will jump to the next preset
number for configuration. Follow
Step 2-3
to set up multiple preset points.
4.
To clear the setup preset points, select a preset number and then click the
button.
To perform the Go to Preset Point function:
1.
Select a preset number (1-255) by clicking on the Preset input box.
2.
Click the
Go to
button
.
