PARAGON960 x4 32CH
72
Record Mode:
Select a record mode from the drop-down list.
Event: Continuous and Event recordings.
Event Only: Event recordings only.
Record Dual Stream:
Click to enable / disable the dual stream recording function. And then
configure the following settings for the Main Stream and Sub Stream.
Resolution:
Select a recording resolution for the Main Stream and Sub Stream.
Record Quality:
Select a recording quality for the Main Stream and Sub Stream. The options
include Low, Basic, Standard, High and Superior. The higher the quality, the more the HDD
space is used.
Normal Speed:
Select a frame rate per second (FPS) for continuous recording. The speed is
limited by the maximum total recording capacity of the DVR as allocated across all the
installed cameras, with upper limit of 30 FPS (NTSC) / 25 FPS (PAL) per individual camera
respectively(real time recording).
Event Speed:
Select a frame rate per second (FPS) for event recording.
Ratio:
Select 4:3 or 16:9 display aspect ratio of a camera, and its video will be displayed in 4:3
or 16:9 format on that channel screen. Please refer to
2.3.2 Display Aspect Ratio
.
Record Audio:
Check the box to enable audio recording on the DVR, and then select an audio
input device. Note that the Audio function is unavailable for Germany.
PTZ ID:
To allow the DVR to recognize and then control the connected PTZ camera, you have
to set up an ID for the PTZ camera. Select
On
and then enter an
ID
for the camera. This ID
must match the ID address set up on the PTZ camera. For setting up the ID address on the PTZ
camera, please refer to the User’s Manual of your PTZ camera.
PTZ Speed:
Select a PTZ speed from the PTZ Speed drop-down list for the camera to move to
the directions when you use the direction buttons during the configuration period.
Apply To:
Click the button to apply the same settings to the desired cameras.
