PARAGON960 x4 32CH
116
6.9
System Setting
You can configure the general settings for the DVR in this menu.
6.9.1
Date / Time
You can set up the date and time for the DVR.
Figure 6-46
Date:
Click to
bring up the on-screen keyboard to set up the date.
Time:
Click to bring up the on-screen clock to set up the time.
Date Format:
Select a date format from the drop-down list.
Time Format:
Select a time format from the drop-down list.
Time Zone:
Select a time zone for the DVR to adjust to when updating from the time server.
NTP:
Select Disable / Enable for NTP time synchronization.
NTP Server:
Displays the time server address that the DVR uses for time synchronization.
Requires operating network configuration and WAN or LAN access to a compatible NTP server.
The default NTP address is the NTP server in Taiwan. To find a compatible NTP address of the
DVR’s physical location, follow the steps below:
a.
Use a computer connected to the Network.
b.
Click Start > Run > type “command” and then click OK.
c.
In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP
Server.
