PARAGON FHD 16x4
106
6.7.4
FTP
Set up the FTP server settings to enable the FTP function. The function is for users to upload
the alarm / motion recordings or snapshots from sub stream to the FTP server. You can
choose to upload either the recordings or snapshots, please see
6.4.1 Alarm
and
6.4.3
Motion.
FTP Server:
Enter the IP address or the host name of the FTP server.
Port:
Enter the port number for the FTP server. Default is 21.
User Name:
Set FTP User’s name.
Password:
Set FTP password.
Confirm:
Input the FTP password again to confirm.
File Name:
Enter the file name.
Save:
Click to save the settings.
Note:
If you want to upload recordings to the FTP, please go to the Remote / Mobile setting
page to select H.264 codec.
