EZ930/950 eZ.HD Outdoor IR Bullet Camera
10
4.
Connect the camera to a AHD DVR or a portable monitor with the 12VDC or 24VAC power
source using the supplied
DC Power Pigtail Cable
or a power adapter.
5.
Loosen the screws on the bottom of housing, then pull out the OSD panel to configure
camera settings using the OSD Menu Joystick, connect one end of the
Test lead
to the
Test-out connector on the camera module and the other end to the portable monitor.
OSD indication as shown in the figure:
Push the Joystick up / down to select
among menu items.
Push the Joystick left / right to adjust the
level of the selected item.
Press the Joystick to enter the submenu or
exit the OSD Setup Menu.
