EFN3320 Fisheye Camera
76
【
SNMP Settings
】
The default values for SNMP v1/v2/v2c and SNMP v3 are already filled in. Click either
of the Enable buttons to enable either of the two. Make your changes as desired. Click on the Trap
Address field to enter the digits, if required.
Click
Apply
to apply the changes or
Cancel
to cancel the changes and return to the previous settings.
【
Network Alarm Settings
】
This function works with EverFocus CMS software. The camera can send a
network alarm signal (when the event occurs) to the CMS servers. To establish the connection
between the camera and CMS servers, the protocol and port number should match with each other.
For more details, please refer to the CMS user’s manual. Note that to enable the Network Alarm
function, you have to check the
Network Alarm
box in the Event Management field (see
7.3.2
Event)
.
Click
Apply
to apply the changes or
Cancel
to cancel the changes and return to the previous settings.
