EFN3320 Fisheye Camera
35
3.
Find an object in the speed dome window and position it to the center by directly clicking on the
window. You can refer to the image below for moving the speed dome image. For example, if you click
on the left-arrow image division, the camera will go left. Repeat this until the target object is adjusted
to the center of the window.
Target Object
4.
When the target object is placed to the center window of the speed dome, click the
Calibrate
button, the fisheye window should be highlighted with a yellow frame.
5.
On the fisheye window, find the target object you placed in the center of the speed dome window, and
then click it.
Click it
Target Object
6.
Test the calibration result by clicking any location on the fisheye window, and the location should be
displayed on the center of the speed dome window.
a.
If the calibration result is ok. Click the
OK
button to complete the setting.
b.
If you want to fine-tune the calibration, click the
Fine Adjustment
button.
c.
If you want to retry the calibration, click the
Retry
button.
