PoE Switch
27
VLAN ID (VID):
Since you want the handover to other switches take place smoothly, the VLAN
IDs (Numbers) need to be like on the rest of your network.
(On other switches you may have the chance to configure names. These are just
for your reference. Only the numbers are important!)
Add:
Enter a VID, select the VLAN member for this entry and then press this
button to add a VLAN entry to the table. The available range of VID is from
1-4094.
Delete:
Select a VID in the table and then press this button to remove a VID
entry from the table. After deleted, the VLAN and its member port setting is
gone.
Update:
Modify the existing VLAN setting. Select the VID, the below settings will
be displayed, you can change the settings and then press the Update button to
update the setting.s.
VLAN Member Port Select :
Select the VLAN Member here.
