EverFocus ELR-4, Инструкция по эксплуатации

Страница: 34 / 128

27
15. Current playback time (the time which indicator locate)
16. End time of time bar (the most right point of time bar)
4.6 PTZ
4.6.1 General PTZ control
Right-click to bring up the menu bar and click on to enter PTZ Menu .
The following actions can be performed using the PTZ Menu:
1. Use Direction Arrows (up, down, left, right) to move the camera to the desired direction
and angle.
2. In Zoom option, Click “ Z+” to zoom closer or “ Z-” to zoom farther away.
3. In Focus option, click “ F+ ” to increase the focus or click “ F- ” to decrease the focus.
4. In Iris option, you can increase the amount of light by clicking “ I+ ” or decrease it by
clicking “ I- “.
5. To program a preset position
a. Move PTZ camera to the specified position
b. Click “ Preset ” button
c. Click the number of the desired position (This will be displayed in the box)
d. Click “ Set ” button
6. Steps to jump to a preset position
a. Click “ Preset ” button
b. Click the number of the desired position
c. Click “ Go ” button
7. Shortcut steps for presets #1-9
a. Click digit 1-9 button without clicking any other buttons
8. Steps to delete a preset position
a. Click “ Preset ” button
b. Click the number of the desired position
c. Click “ Delete ” button
9. Steps to run Auto Pan
a. Click “ Auto Pan ” button
10. Pattern Operation (Pattern is the “0” Tour in Everfocus and Pelco PTZ cameras)
a. Click “ Pattern ” button
11. Steps to run a tour
a. Click “ Tour ” button
b. Click the number of the desired tour
c. Click “ Go ” button
12. Steps to remove a tour
a. Click “ Tour ” button