EverFocus EDR410H, Инструкция пользователя

Страница: 15 / 134

7
LAN Connector: The RJ-45 LAN connector.
LAN
7
ALM-INPUT: Normal open or normal close type alarm signal inputs (relay triggers).
The Alarm Input can be selected as Normal Open (
N.O. ), Normal
Close ( N.C. ), N.C. TRANS ., or N.O. TRANS input in the ALARM
SETUP MENU .
N.O. = relay contact is in an open state. Once the contact is closed an alarm is triggered
from 1-99 sec duration
N.C. = relay contact is in a closed state. Once the contact is opened an alarm is triggered
from 1-99 sec duration
N.O. TRANS = relay contact is in an open state. Once the contact is closed an alarm is
triggered and will alarm until the contact is opened again.
N.C. TRANS = relay contact is in a closed state. Once the contact is opened an alarm is
triggered and will alarm until the contact is closed again.
When an alarm occurs, alarm recording will automatically start.
ALM-OUTPUT: A build-in relay offers 3 nodes which are ALM-COM (common),
ALM-NO (normal open) and ALM-NC (normal close) for external
use. Used to trigger an external device, like an burglar alarm panel or
siren.
Note: Please check APPENDIX C to see other available alarm input/output
functions.
6
Alarm Input
MAIN MONITOR: This connector is used for the main monitor display, a number of
different display modes may be selected for viewing.
CALL MONITOR:
This connector is used for the call monitor. This monitor can only
display a full screen or a quad screen.
MONITOR
3
4
For EDR810 Series:
VIDEO IN (1~8): The BNC connectors of video input enable the system to
receive the signals from each camera through the 75 ohm
coaxial cables.
VIDEO IN
5
Alarm Input/Output