EverFocus ECOR Series, Инструкция по эксплуатации

Страница: 49 / 105

42
( ( ' < $ $#
Figure 5.12 is a screen shot of the ' $ @ ? $ 5 . This menu will walk you through
alarm and event setup.
Figure 5.12 (Alarm & Event Menu 1 Alarm)
( ( 0
6 Select the alarm number.
% 6 Check box to enable alarm.
' 6 Check box to record alarm events in the log.
6 This field is to change the type of alarm trigger.
N.O.: Normal Open contact.
N.C.: Normal Close contact.
6 Assign a name for the alarm input.
( 6 This field is for assigning the alarm to a specific camera. For example if you had an
external motion detector on camera one you would set this option to “1”.
D 6 Select PTZ Preset from “0” to “255”. If the Active Camera is a PTZ speed dome, the alarm will
move the camera to a preset position for event recording. This function can improve surveillance quality of
an alarm event.
6 This will transmit a signal to another device. It can be set to either “ ” (not activated)
or “ 2 ” (output signal 1 transmits).
Downloaded from www.Manualslib.com manuals search engine