WY Series User
’
s Manual
Copyright
©
EVERFINE, Copy or spread without authorization is prohibited.
13
state.
○
11. DISPLAY OVP
It can switch the voltage window by pressing the key. When the
“
DISPLAY
OVP
”
lights, voltage window will display the Protect Voltage value flickeringly.
Adjusting the knob of Voltage can change the over-protected voltage value. Press
the key again to complete the setup and the indicator of
“
DISPLAY OVP
”
will be
off. The lower limit of Protect Voltage is 5V.
○
12. DISPLAY SETTING
It can switch the display between voltage and current. When the
“
DISPLAY
SETTING
”
lights, windows of Voltage and Current will display the setting value.
Adjust the knob of Voltage and Current to change the setting value. Press the key
again to complete the setup. Press OUTPUT key to display the setting voltage and
current value.
○
13. OUTPUT
Press the key to output voltage with the indicator
“
OUTPUT
”
lighting.
○
14. RESET
When the indicator
“
OUTPUT
”
lights, pressing the key can make the power
supply output off and the voltage and current setting value be zero. When the
indicator
“
DISPLAY SETTING
”
lights, pressing the key can make the voltage
and current setting value be zero. In the alarm state, press the key to stop the
alarm.
○
15. KEY LOCK
Press the key to enter lock state and other keys will be noneffective. At the same
time, the indicator
“
LOCK
”
will light. Pressing the key again can release lock
state.
○
16.
“
+
”
Output terminal of power supply ().
○
17.
“
-
”
Output terminal of power supply (OUTPUT -).
○
18. ALARM
When the four abnormities as below appear, the indicator ALARM will light and
the buzzer gives an alarm, also Current Window displays
“
Error
”
. At the same
