CloudBook
User Guide
72
•
Save Changes
Saves Setup data to CMOS.
6.7 How to Upgrade the BIOS
Your CloudBook uses EPROM Flash BIOS chip that allows you to easily
upgrade the BIOS program. When you update the BIOS, any customized
settings you made are lost.
To upgrade the BIOS:
1.
Put in the BIOS Update data into the USB device.
2.
Power on the system with the diskette in the diskette drive.
3.
On the DOS prompt, type the following command.
A:\>Phlash
XXXXXX.ROM
(
BIOS filename) or
A:\>
XXXXXX.BAT
(
Batch file for BIOS file)
Press <Enter> to run this BIOS utility. After the system has been
successfully run this program, a message similar to the following appears:
Flash memory has been successfully programmed,
press any key to restart the system. If the
system does not restart, turn it off, then turn
on again.
4.
Press any key to restart this system.
Contact your dealer for the latest BIOS update file.
Содержание CloudBook CE1200V Series
