ALL RESET
Reset all parameter to default
INFO
IR ADDR
Camera IR control address
USB
USB firmware version
CLIENT
Default client end protocol: VISCA
ARM VER
ARM firmware version
FPGA VER
FPGA firmware version
CAM VER
Camera version
RELEASE
Software release date
IP ADDRESS SETTING
Default your camera is set to DHCP OFF with IP adress 192.168.1.188 (see label at the bottom)
Please check your IP Address settings for using it in your network. To change your IP address please
use the OSD menu or web interface.
UVC CONTROL
1. Only run the client software after the USB3.0 camera has completed self-configuration (the LED will
light up in blue, no flashing)
2. Make sure the USB3.0 camera is recognized by the PC Device Manager.
3. Make sure the interval of video format switching is more than 3 seconds.
4. Make sure the interval of control command sending from the server (via USB) to the camera, is more
than 250ms.
5. Support standard UVC interface.
PU_BRIGHTNESS_CONTROL
81 01 04 4d 00 00 0p 0q FF
PU_CONTRAST_CONTROL
81 01 04 A2 00 00 0p 0q FF
PU_SATURATION_CONTROL
81 01 04 A1 00 00 0p 0q FF
PU_SHARPNESS_CONTROL
8x 01 04 42 00 00 0p 0q FF
PU_GAMMA_CONTROL
8x 01 04 5B 0p FF
30
WWW.EVERETIMAGING.COM
