26
5PX1-INS-LAB-RevC14 • Paramount XD User Manual
Check upholstery
Check upholstery at least once a month. Inspect for rips, tears and
worn spots. Ensure that all upholstery-attaching screws are present,
properly aligned, and well-secured. Use a Phillips screwdriver to
tighten upholstery mounting screws. Check attaching screws for
sharp edges or stripped screws, and replace if found.
WARNING: Worn or torn upholstery, or upholstery with loose
hardware, must be replaced immediately. It may not support
body weight.
Check rear wheel adjustment
Inspect the wheels at least once a month. Check alignment by
elevating the rear of the wheelchair on a stable object until the rear
wheels clear the ground, or placing the wheelchair upside down in a
stable position such that the wheels can spin freely. Spin the wheels;
there should be no wobble or sideplay, and the wheels should spin
freely without binding. The bearings should be clean and rotate
smoothly. Check rim sideplay to verify that bearings are not too
loose. If there is a problem, contact your Graham-Field authorized
distributor. If adjustment is required, this should be done by your
Graham-Field authorized distributor only.
Check arms
Check arms at least once a month. Inspect for sharp edges or cracks
which could weaken the arm, and replace if found. Ensure all
attaching screws are present and tight. Use a Phillips screwdriver
to tighten armpad mounting screws. Check for burrs on the screw
heads and replace if found. Ensure that screws do not extend into
the padding. Confirm that the posts at base of arm fit correctly in the
sockets, snug but not binding.
Check backposts / push handles
Check backposts at least once a month. Ensure that all mounting
hardware is securely fastened and that the backposts are not bent or
damaged. Contact your authorized distributor if you observe cracking
or peeling paint or plating.
Содержание Paramount XD
Страница 31: ......
