Everest & Jennings Paramount XD, Руководство пользователя, Страница: 19 / 31

5PX1-INS-LAB-RevC14 • Paramount XD User Manual 19
Adjust legrest elevation
CAUTION: It is possible to adjust the elevating legrest without
moving the legrest release lever, but to lock it in place and
prevent it from falling, you must move the lever rearward.
The elevating legrest
is adjustable to three
positions: low, mid,
and high (horizontal)
elevation. Elevation is
adjusted by locking a
slotted plate controlled
by the legrest release
lever onto a stop pin
in low, mid, or high
position, as shown at
right.
Moving the release lever forward raises the plate notch from the
stop pin, allowing the plate slot to move over the stop pin and change
position. Moving the release lever rearward lowers a plate notch onto
the stop pin and locks it in place.
1. To allow the elevating legrest to move without dropping
suddenly, support its weight and move the release lever forward.
2. Slowly move elevating legrest to desired position.
3. Move the release lever rearward to lock notch onto stop pin.
Ensure elevating legrest is locked in position before letting go
of legrest.
• When the stop pin is in the first notch, as shown above, the
legrest is in low position.
• When the stop pin is in the middle notch, the legrest is in mid
position.
• When the stop pin is in the last notch, the legrest is in high
(horizontal) position.
WARNING: Ensure elevating legrests are locked in place
before occupying or operating wheelchair.
elevating
legrest
low (stop pin
in first notch)
mid (middle notch)
high (last notch)
legrest
release
lever
slot
plate
Adjust legrest elevation