12
GF0500075RevA05
Casters
— Check the caster stems and forks for proper rotation at least every three months. Be sure the
stem is fi rmly attached to the fork and that the forks and stems are not bent. The caster forks must swivel
freely to allow the wheelchair to be steered. Make sure axle bolt/stem nut are tight enough to allow a snug
but free spinning fi t. If adjustment is too loose, the caster will fl utter or shimmy. If it is too tight, the caster
can not turn freely and will be diffi cult to steer. Evaluate all threads, locking nuts and ball bearings. Replace
as needed. If the caster requires further adjustment or the caster stem bearing requires replacement, contact
your qualifi ed Everest & Jennings dealer.
Chrome/Frame
— Wipe off chrome frequently, at least once a week, using a soft cloth. Dry the wheelchair
immediately if exposed to moisture. Polish all chrome or painted parts once a month with a mild soap and
water solution or an auto wax. DO NOT use solvents, abrasive cleaners or waxes such as chrome cleaners or
scouring cleaners, caustic chemicals or spray silicones as they will scratch the fi nish. Never use steam or high pressure cleaners as they
will remove protective coatings and lubricating oils.
Crossbraces
— Make sure the wheelchair folds smoothly. Inspect for signs of excessive wear or cracked and peeling plating. Make
sure the seat rails are not bent. The center pin should be “free-fl oating” and should be lubricated with oil every six months.
Footrest/Legrests
— Inspect the lock mechanism to confi rm sure fi t. Check for cracks, burrs or sharp edges. For wheelchairs
with heel loops, make sure the anchor bolts are tight and secure. For swing away detachable assembly, be sure the assembly will
automatically lock securely in place and will not accidentally unlock.Handgrips (push handles) — Be sure they are tight and securely
fastened.
Positioning Belts
— Inspect hardware for proper installation. Replace immediately if belt is frayed or fastener damaged.
Seat Guide Tips
— Be sure all required guides are present. They fi t into the end of the seat rail at the backpost and front post on
fi xed-arm models; at the backpost only on detachable arm models.
Rear Tipping Lever Sleeves
— Be sure they are securely fastened and will not rotate or slip.
Tires
— Examine tires for surface wear and cracks and replace as needed. Solid rubber tires should be replaced when they become
loose on the rim or as cracks appear.
Upholstery
— Clean the upholstery with a mild soap solution, rinse and wipe dry. Inspect for rips, tears and worn spots and replace
immediately if worn or torn, as it may not support your body weight. Inspect attaching screws for sharp edges or stripped screws.
Assure that all are present, tight and installed through the metal reinforcing strips. Check for excessive slack. If tautness is not constant
from top to bottom, replace upholstery.
Wheel Locks
— Check wheel lock engagement weekly. If lock is worn or damaged, replace immediately. Always make sure the
locking assembly is securely attached to the front and that the wheel will not rotate when the wheel lock is engaged. Check to see
that the wheel locks do not press against the tires when in the “OFF” position. Inspect the hardware for looseness or signs of wear.
Excessive force should not be required to either engage or release them. Oil the mechanism with one or two drops of oil once a month
at its pivot points. Remove excess oil and dirt. Maintain proper air pressure in tires as this will affect secureness of wheel locks.
CONSUMER MAINTENANCE SCHEDULE
WARNING:
• Unauthorized modifi cation or the use of non-Everest & Jennings replacement parts could change the structure of the
wheelchair, void the warranty and create a hazardous condition which could result in serious injury.
NOTE:
Use only Everest & Jennings replacement parts. A parts catalog is available through Everest & Jennings dealers to assist
in the ordering of parts. A complete inspection of your wheelchair, including maintenance, servicing and safety, should be
handled by a qualifi ed Everest & Jennings dealer at least once every 6 months.
Remember your Everest & Jennings dealer knows your wheelchair best when it comes to service and repairs. Perform an overall
inspection of your wheelchair when you fi rst acquire it, with the assistance of your Everest & Jennings dealer and/or healthcare
professional. Initial adjustments should be made to suit your individual body structure, physical capabilities and personal preference.
To continue to ensure that your wheelchair operates safely and properly, routine maintenance is necessary. Contact your Everest &
Jennings dealer with any questions or concerns regarding the safe operation and maintenance of your wheelchair. Because regular
maintenance is important for your safety and continued operation of your wheelchair, we suggest the maintenance guide on pages 25
and 26.
Содержание Everest Jennings
Страница 2: ......
