Everest & Jennings Everest Jennings, Руководство пользователя

Страница: 10 / 20

8
GF0500075RevA05
TRANSFER ACTIVITIES
WARNING:
• Before attempting a transfer, always engage both wheel locks.
• Check tire pressure of pneumatic tires (if so equipped) weekly to ensure correct air pressure. Failure to maintain proper air
pressure could result in the malfunction of the wheel locks, which could result in personal injury.
• DO NOT step on the footplates, as this could cause the chair to tip. Fold them up, detach them, or swing them to the side.
There is a critical moment when there is little or no seat platform beneath you, so take every precaution to reduce this
unsupported distance BEFORE you attempt to transfer.
Transferring into or out of a wheelchair is a very diffi cult maneuver and can be very hazardous for both the
wheelchair user and attendant. Under ideal conditions, such transfers should only be attempted with the help
of a well trained attendant using a “patient lift.” However, there are situations when the wheelchair user
must, or chooses to, transfer without the aid of either an attendant or patient lift. Exercise extreme care in
these situations. Consult your healthcare professional for assistance in developing your individual technique.
Whenever possible, use two (2) attendants to perform transfers. Make sure the wheelchair is stabilized
and will not move or slide during the transfer. Take extra precautions to prevent tipping. Use good body
mechanics to prevent injuries.
TILTING
WARNING: Do not tilt the wheelchair backward past its balance point as it can be dangerous and may result in injuries.
DO NOT attempt to tilt your wheelchair without assistance. Attendant should ensure handgrips are fi rmly attached and
that they do not turn or slip off.
Tilting the wheelchair backward is generally required to negotiate such obstacles as ramps, inclines, curbs, stairs and door sills. Tilting
should only be performed with the assistance of an attendant. An attendant should:
(1) Grasp the push handles securely and ensure that the hand grips are fi rmly attached.
(2) Make sure the wheelchair user’s feet are situated fl at on the footplates and that arms, hands and fi ngers are clear of the wheels.
(3) Advise the wheelchair user prior to tilting the wheelchair backward.
(4) Place one foot on the tipping lever and apply downward force until the proper balance point is reached (approximately 30 o).
(5) Lower the front end slowly.