Everdure HCT245M Скачать руководство пользователя страница 5

 

 

HEAT LIVE RELAX 

 

REMOTE CONTROL BATTERY REPLACEMENT 

 
Push the catch on the battery holder down & pull holder out. Place the battery into the holder and push back into 
position. 

 
 
 

 
 

 

SAFETY FEATURES 

 
1.   

A thermal overload protector is built in to prevent overheating. 

2.   When an overheat temperature is reached, the heater will automatically shut off.  It can only resume operation 

when the user resets the unit (see reset instructions below). 

 
To reset your heater:  
1.

 

Unplug the heater and wait between 5-10 minutes for the unit to cool down. 

2.

 

Then, turn on the unit again and operate normally. 

 

A tip switch is built into the unit. If tipped over the appliance will shut off. Right the appliance to restart. 

 

CLEANING & MAINTENANCE 

 

WARNING:  

ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT 
IMMERSE HEATER IN WATER! 

 

Take the Air Inlet and the Air Filter off, clean the Air Inlet with the vacuum brush attachment on your Vacuum 

cleaner, and wash the Air Filter in warm water and dry it. DO NOT DRY AIR FILTER IN DIRECT SUNLIGHT. 

Clean the body of the heater with a soft damp cloth. Always make sure that the heater is completely dry before 
connecting back to the mains supply. 

CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the heater. NEVER 

use ALCOHOL OR SOLVENTS. 
STORAGE: Store the heater with these instructions in the original packaging, in a cool, dry place. 

 

WEEE WARNING

 

   
This product should not be disposed of with household waste.  Please recycle where facilities exist and  
check with your local authority for recycling advice. 
 

 

HINTS & TIPS 

 
Where possible your electric heater should be connected to a power outlet that uses a separate 10 amp power 
circuit.  This will avoid overloading your household fuse. 

 

 

In the event that your household fuse is overloaded and trips, please note this is normally caused by the use of 
excessive power outlets at the same time your heater is operating (for example, a steam iron, kettle, toaster etc.).  
Please ensure to check the use of the power circuit and adjust when heater is in use (i.e. turn off the heater when 

boiling a kettle).

 

Should you still experience difficulty contact Everdure Service for assistance. 

电 池

Содержание HCT245M









Отзывы: